Green wood reception.- This process begins from the arrival of the truck to the plant, it is discharged and it is classified to be armed in cars and later on it'll be dried.

Drying.- The Kiln drying is an unitary operation that consist on the extraction of the excess of water retained in the wood by means of heat in state of  vapor, generated by the boiler.  

The same one that is irradiated with forced air by fans trough the batteries of pipes that are inside the Kiln In this way the wood loses humidity without deteriorating,  until obtaining a low  humidity of around 10%.

Production area.- This process begins from the transfer of the dry balsa wood form the stock area to the different machines where it is surfaced, cut, squared, etc and then qualifeied and classified in its respective areas.

The machining process is not a contamination agent, because the generated waste istranported by means of a system of efficient aspiration, which allows us to breathe a clean air and all the waste is used in the boiler to produce vapor for the kilns.

Gluing area.- Once classified the balsa wood it's moved from its respective areas to the sizing table saw, where the panle is sized according to its thickness. 

Then, once a block is completed it's glued and pressed until bonded.

Packing area.- Prior to packing, we take several samples of humidity, recheck any quality problem in order to assure a perfect product to our clients.

The balsa wood sheets are packed in recycled cardboard boxes.

Loading area.- Our  means of transportations are: maritime andy by air, we use containers of 20' any 40', and also in bundles or boxes.

            Home 

               Consultation and Suggestions     

Factory: (593-4) 2110395 - 2110533

Address: Km. 10 ½ Vía Daule

Office: (593-4) 2690851 - 2396410 Fax: 392174 - 392347 Ext. 1004
Address: Cdla. La FAE Mz 20 villa 4
Guayaquil - Ecuador